mjkellerii Posted January 16, 2018 Share Posted January 16, 2018 I have a ticket opened with support but was wondering if anyone else is having this issue... I am using a Spider V 240 with FBV3 and the Mac and/or IOS App connected via a Relay G10T. Issue occurs using either app or none (using the amp controls only with no apps connected). Very easy to get volume to 0% or 100% (min and max work as expected - but it seems like I have to put the EX-1 to almost 40-50% to gat any volume at all - then it kinda jumps around a bit and settles. Once pedal is depressed to about 60-70% there is no further increase in volume. There seems to be about a 30% range of pedal adjustment in the middle where actual volume changes are heard, and it is extremely difficult to get the volume where I want it to be. Always either too loud or too soft. Really difficult to adjust volume and it “jumps" around. If I assign an effect to the EX-1 the volume seems to work OK on the built in pedal - but the effect percentage “jumps†too quickly using the EX-1. I also have an Amplifi 150 with an FBV Shortboard MKII connected with a cable - the issue does not seem to be as bad there when I connect the EX-1 to the MKII on the Amplifi - but still difficult to adjust volume. I have re-flashed the FBV III and the Spider V. Quote Link to comment Share on other sites More sharing options...
mjkellerii Posted January 17, 2018 Author Share Posted January 17, 2018 Hmmmmm.... Seems to work much better if I use the Spider V remote app to set a minimum volume level at say 10 %. I did this and it acts much better - 10 - 20 % setting for a minimum seems to be the sweet spot. The closer the minimum gets to 0% the worse it acts. Quote Link to comment Share on other sites More sharing options...
mjkellerii Posted February 4, 2018 Author Share Posted February 4, 2018 Support says not right even with changes I made above. They are replacing! Thank you support! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.