Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Dt 25 Has Gotten Quiet


zimbachu
 Share

Recommended Posts

Over the last couple of days my DT25 has become very quiet. I have had the master volume at the same position but it just keeps on getting fainter. Would this be a tube issue or something more sinister? I run my guitar through a pod hd 500x to the DT25, in low volume mode, through the line6 connection.

Link to comment
Share on other sites

When you say very quiet do you mean a slight variation in volume or a drastic drop?

things to try:

 

Is the volume ok if you just plug the guitar straight into the DT25 as a standalone amp?

 

Have you tried taking a cable from the 1/4 outs of the hd500 and feeding it into the effects return of the DT25 or even plugging the guitar directly into the effects return to ensure the power amp is fine. Bear in mind the master volume control on the amp is now bypassed and you'll have to turn the volume down on the pod or guitar before testing.

Link to comment
Share on other sites

It was getting really quit like it would start out a little lower but about 5 minutes later it would not have any sound coming out really.

I guess i should have plugged in to the amp right away but when things go wrong logic goes out the window.

Unplugged the XLR cable and just a 1/4 and it seemed to be at a good level. Re-plugged in the xlr cable and sounds good again.

Thanks guys.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...