FUMCGJ Posted October 22, 2013 Share Posted October 22, 2013 We have 2 setups for our services, one for contemporary and one for traditional. After the last update, the mains drop to off every time we switch between setups. Is there a way to save the main out level? We are using the Stagescape M20d. Thanks Quote Link to comment Share on other sites More sharing options...
kmachman Posted October 22, 2013 Share Posted October 22, 2013 My mains have dropped to Zero when changing setups even before the firmware upgrade… Not sure why it does that... Quote Link to comment Share on other sites More sharing options...
silverhead Posted October 22, 2013 Share Posted October 22, 2013 That is normal behaviour. I guess the thinking is that a Setup is generally configured and saved with reference to a specific set of instruments in a specific venue/room. Hence, a change in Setup will load a configuration that may not be appropriate for the current set of instruments and room (volume, feedback, etc...). Accordingly the Mains Out is zeroed so that the user can proceed with caution and avoid an immediate unpleasant incident with excessive volume/feedback. Quote Link to comment Share on other sites More sharing options...
litesnsirens Posted October 22, 2013 Share Posted October 22, 2013 This is also true of the monitor sends and for the exact same reason. You don't want to load a new setup and suddenly be greeted with a bunch of feedback because the new settings are hotter than what you currently had. 1 Quote Link to comment Share on other sites More sharing options...
jaminjimlp Posted October 24, 2013 Share Posted October 24, 2013 Okay I can see a new feature for our next firmware update which would be, a small check box when you would load a complete scene or setup you would be able to check the box that says "load with previous volume settings" Quote Link to comment Share on other sites More sharing options...
silverhead Posted October 24, 2013 Share Posted October 24, 2013 Okay I can see a new feature for our next firmware update which would be, a small check box when you would load a complete scene or setup you would be able to check the box that says "load with previous volume settings" That would be the second check box. The first would say something like "I hereby indemnify and hold harmless Line 6 from any damage to equipment or persons resulting from excessive volume and feedback." 1 Quote Link to comment Share on other sites More sharing options...
Digital-sound Posted October 25, 2013 Share Posted October 25, 2013 I think the main volume remains the same level when switching "scenes". Could you configure a "scene" to do what you need? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.