Baumgartner Posted November 2, 2013 Share Posted November 2, 2013 Monkey has all green checks; Drivers are up to date (4.2.6.9), Pod farm is up to date(2.56), Gear box is up to date(3.72), USB Firmware up to date(1.02), Line 6 License (1.07), Monkey (1.65), Riffworks 2 (2.22). Windows Vista Ultimate 4GB RAM Buffer slider at second setting (Near extra small) on Pod Farm2 After I start Pod Farm 2 or Gear box, The needles in the gauges on my UX2 jump around for no reason. I have a condensor Mic in Mic 1, and my input is Mic 1 on the software, Phantom power is on. No audio is heard but it still indicates some noise on the needles since I set the needles to indicate "Input". I reinstalled driver and it worked, but after I restarted my PC, back to the same problem.., I swapped cables for my mic and still nothing... After I talked to the Line 6 customer support, which he told me to reinstall everything......... I did just that, and still getting the same problem. The only audio I can hear while trying to monitor my Mic is a little faint soft crackling and some humming while moving my mouse. It's not even really enough to notice. The needles stay at about halfway and every millisecond to a second it will jump to clockwise. It's pretty random it seems. I'm about fed up with this Line 6 equipment but I don't exactly have the money to get something else. The Line 6 Support has been less than desirable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.