Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Breaking The Rules


Karl_Houseknecht
 Share

Recommended Posts

I don't know why I never did this before, but there's something to be said for trying things that go against the "rules" with the DT/POD combo.

 

For instance, I had a pretty decent Marshall tone going on with the P75 preamp on the HD500 using topology II.  That's the way it's supposed to work, right?  But I'm more of a Mesa kind of guy and I like my "Marshall" tones a little more modern.  Switched the topology to IV using the same preamp.  Bingo.  Right where it needed to be to match up with Crunch mode on CH2 of my Mark V.  Has just the right round boldness without annoying top end.

 

The rules are made for breaking.  I've been all smiles for the last couple of hours.

Link to comment
Share on other sites

I don't know why I never did this before, but there's something to be said for trying things that go against the "rules" with the DT/POD combo.

For instance, I had a pretty decent Marshall tone going on with the P75 preamp on the HD500 using topology II. That's the way it's supposed to work, right? But I'm more of a Mesa kind of guy and I like my "Marshall" tones a little more

modern. Switched the topology to IV using the same preamp. Bingo. Right where it needed to be to match up with Crunch mode on CH2 of my Mark V. Has just the right round boldness without annoying top end.

 

The rules are made for breaking. I've been all smiles for the last couple of hours.

+1

I run most of the pre's (bassman, plexi, blkface) through topIII, i realy like the depth an sponginess of that topology.

Link to comment
Share on other sites

+1

I run most of the pre's (bassman, plexi, blkface) through topIII, i realy like the depth an sponginess of that topology.

 

 

I am a big fan of Top III as well … "spong (iness)" ….. good description !~!  From now on I will say â€¦. "I think it needs more "spong" â€¦. nice.

 

Good post from Karl â€¦ in my experience it often pays to try everything and anything despite what the "literature" says. Great discoveries are made that way.

Link to comment
Share on other sites

Played this patch with my Tele at church this morning, which I just yesterday put a DiMarzio Area Hot T in the bridge and went up a gauge on strings....man, it smoked.  

 

Literally.  We had to cut our worship set short because smoke was pouring out of our heating ducts into the building. :)  Turned out to be a fan motor that seized up and then burned up.  But let me tell you, I was worried for a moment because I left everything on stage as we evacuated.  HD500X, DT25, Tele...entire rig.  I'm thinking to myself, man, I just got this thing sounding great and now it's going to get burned up or water dumped on it?

 

Turned out everything was contained to the heater unit and no further damage.  Thank God!  It really sounded good.

Link to comment
Share on other sites

 

I am a big fan of Top III as well … "spong (iness)" ….. good description !~! From now on I will say …. "I think it needs more "spong" …. nice.

 

 

It,s funny how we intent to describe tone, chunky, fat, creamy, organic, but in some way almost every one(guitarist) knows wat you mean.

 

Try to describe for instance the colour blue to a blind man, that's imposible

  • Upvote 1
Link to comment
Share on other sites

It,s funny how we intent to describe tone, chunky, fat, creamy, organic, but in some way almost every one(guitarist) knows wat you mean.

 

 

Two tonal descriptors I've heard countless times but STILL don't know what they refer to:

 

1.  Three dimensional

2.  Organic

 

To me, those are the most useless descriptions of tone I've heard.  Fat, creamy, chunky...those convey some real information.  But organic?  Was my tone grown on a farm where they didn't use pesticides?  Three dimensional?  I don't even know how that applies to sound. :)

  • Upvote 1
Link to comment
Share on other sites

As a career professional Recording Engineer I can assure you I have heard some unbelievable "descriptions" for tone. One short story (and it is a true one), in a session once the (rather stoned) keyboardist came in to the control room and said "hey, can you do "something" with my sound" … lol, I said, "how about I just turn it off" …. honest !~! … under the circumstances (we were all friends) it got a nice laugh but honestly, there are many many ways to "try" and describe sound but like MGBade says …. many times the "concept" is conveyed by the most unusual words. Recently I have been working with a product called "Jam Hub", it is a headphone monitoring concept for rehearsals etc. IF the drummer has eDrums then everyone can plug in after pedals without the need for amps. The bass player said " yes that's cool but sometimes you just need amps to get the "Bone Feel" â€¦ I thought that was a very "organic" description and right on the money â€¦ and ... I knew EXACTLY what he meant â€¦ !!!

Link to comment
Share on other sites

  • 2 weeks later...

 

 

For instance, I had a pretty decent Marshall tone going on with the P75 preamp on the HD500 using topology II.  ...............................................................................  Switched the topology to IV using the same preamp. ......................

 

 

 

This maybe a dumb question - but do you select the preamp and save it in the HD500 patch, and then when you stomp on that patch, do you then manually switch the topology on the DT25 to the one you want, then save the patch again on the HD500, and then when you swap to that patch in future does it remember to recall the topology you switched to?  Or does it always recall the Line6 assigned topology for the preamp selected in the HD500 and you have to manually switch the topology on the DT25?   

Link to comment
Share on other sites

I build my patches in HD Edit and the topology you select when you build your patch saves with it.  When you select that patch in the future it configures the DT just the way you specified in the patch.

 

Ah! Thanks radatats!  I usually program my HD500 using the hands on control when I am connected to my powered PA speaker or when connected to my DT25.  I keep forgetting about HD EDIT!

So to do the same thing outside of HD EDIT, is presumably to set the sound on HD500 and then set the topology on DT25 and then save patch on the HD500.

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...