PomataL6 Posted November 22, 2013 Share Posted November 22, 2013 Hello everybody! I hae two problems, really: the first is that I downloaded this preset http://line6.com/customtone/tone/225077/, and when I try to change a parameter of the amp, let's say the gain, the knobs doesn't move. The other is this: when I'am editing my present on the computer ¿how can I turn on or turn off the distortion of the amp that I chose? ¿There is something like the gain button you find on amps or something? Thanks! Quote Link to comment Share on other sites More sharing options...
panaman Posted November 22, 2013 Share Posted November 22, 2013 i have seen some tones where the amp cannot be controlled unless you move the little arrow to/above the amp icon in the display. don`t know why but it helps. while the arrow position is usually saved along with the tone, it doesn`t with some of these misbehaving ones, meaning whenever you call up that tone, you will again have to move the arrow over to the amp position if you want to use the drive-bass-mid- etc. knobs on that tone. below the "FX" - "AMPS" etc. header, there is the little LED symbol all the way on the left of each effect, left of the effect icon, to click it on or off, and it will say "on" or "off" below the LED it will be visible once/if a fx-type is selected from the fx-type pull down menu on the right, same row. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.