rcriche Posted November 30, 2013 Share Posted November 30, 2013 I just buy the POD HD400. I testing at the store and it's ok however now, in my home, the equipment is on, but i plug my guitar and nothing happens, no sound.. even tuner not working. I changed the cables, reboot, even restore the config.. nothing resolve and I don't know what to do. *I'm Brazilian, sorry by my poor english Quote Link to comment Share on other sites More sharing options...
still_fiddlin Posted November 30, 2013 Share Posted November 30, 2013 You have an amp that you can plug into? With the same guitar and cable that works in the amp and not changing anything, move the plug to Guitar In on the 400. Set the master volume about 12:00 (small knob on the back panel). Push the volume pedal down. You should hear something, and the tuner should work in any case. I'd go back to the store if you can't get it working! (On my way to Porto Alegre as I type!) Quote Link to comment Share on other sites More sharing options...
rcriche Posted November 30, 2013 Author Share Posted November 30, 2013 My amp is in the studio. I tested with headphone and connected to the pc with the HD400 Edit. I plugged a cable in out for amp to test. Spite of this, to me, does not make sense .. the tuner had to work ... is as if the POD was not getting the guitar signal. ----------------- meu amp está no estúdio. Testei com fone de ouvidos e conectado ao pc com o HD400 edit, até pluguei um cabo na saÃda para o amp para testar. Apesar disso, pra mim, não fazer sentido.. o tuner tinha que funcionar... é como se a POD não estivesse recebendo o sinal da guitarra Eu sou de Curitiba. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.