Jump to content


Photo

Problems With The Volume And Wah Fbv Express Mkii

fbv mki / mkii controllers

  • Please log in to reply
5 replies to this topic

#1 agauna69

agauna69

    Just Startin'

  • Members
  • Pip
  • 2 posts
  • Registered Products:1

Posted 10 December 2013 - 05:36 AM

 
Hello, I need help in MKII express connected to my POD 2.0, the issue is that the volume did not work, and when I press to use WAH can not give expression, the volume pedal not raise or lower the sound.

Please help with this issue and to generate calibration as given by pressing D and connecting USB, but to also not work.

 


  • 0

#2 phil_m

phil_m

    Uber Guru

  • Line 6 Expert
  • 8815 posts
  • LocationMinneapolis, MN
  • Registered Products:2

Posted 10 December 2013 - 06:26 AM

On the jack for the foot controller on your POD, does it say "FBV"? If your 2.0 is an older version, it may not be compatible with the MKII Express.


  • 0

"It is not our duty to understand the arbitrary, meaningless dictates of machines"

- Don Norman in The Design of Everyday Things


#3 agauna69

agauna69

    Just Startin'

  • Members
  • Pip
  • 2 posts
  • Registered Products:1

Posted 10 December 2013 - 10:10 AM

Not the new version if it actually worked to pricipio hassle then apparently desconfiguro works everything but the volume and expression of WAH.


  • 0

#4 ZandraXara

ZandraXara

    Just Startin'

  • Members
  • Pip
  • 2 posts

Posted 27 November 2014 - 10:21 PM

check the FBV port on the pedal... or on the pod.. sounds like you might have some bent pins.


  • 0

ZANDRA XarA


#5 ZandraXara

ZandraXara

    Just Startin'

  • Members
  • Pip
  • 2 posts

Posted 27 November 2014 - 10:33 PM

Assuming you have a Spider IV.  You can control many parameters, such as pitch bend, by programming the amp settings in a patch.  Suggest you read the amp manual


  • 0

ZANDRA XarA


#6 fflbrgst

fflbrgst

    Guru

  • Members
  • PipPipPipPipPip
  • 2521 posts
  • LocationNew England
  • Registered Products:3

Posted 01 December 2014 - 05:31 AM

check the FBV port on the pedal... or on the pod.. sounds like you might have some bent pins.

Hopefully the OP got it figured out - the post you replied to is almost a year old!


  • 0