robswen Posted January 16, 2014 Share Posted January 16, 2014 Hello; I've recently setup my Egnater with my Podhd500x using the 4 cable method. Guitar into guitar in on the Pod, fx out from Pod to amp front, 1/4 unbalanced L/mono out of the Pod to fx loop return of amp, fx send on amp to 1/4 input to Pod. The problem I'm having, is that effects are not recognized if they are placed after my fx block, (my Egnater preamp) in the patch. In otherwords I need to place my fx block at the end of my patches and all effects, delays, reverbs comps etc before my fx block. Any suggestions would be appreciated, thanks Quote Link to comment Share on other sites More sharing options...
phil_m Posted January 16, 2014 Share Posted January 16, 2014 Do you have the footswitch for the Egnater connected? There's a switch on there to turn its effect loop on and off. It's just labeled "Effects". It sounds as if you may have the Egnater's loop off. 2 Quote Link to comment Share on other sites More sharing options...
robswen Posted January 17, 2014 Author Share Posted January 17, 2014 Hi Phil, turns out this was the problem. Thanks for the answer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.