Skitzolinguistiq Posted January 20, 2014 Share Posted January 20, 2014 I switched all my gear over to Mac tonight and wish I never did. All of it was working fine on my PC. The only problem was how slow it ran. Anyways, I reinstalled Reason 7.0.1, authorized it, got Pod Farm back with it's Monkey, set all my preferences and all was well. Then I checked to see if the Monkey had any updates for me. The drivers and the USB firmware updated just fine. Then when I got to the Flash Memory, my KB37 shut down. All I got was the clip lights blinking back and forth. So, I tried again as instructed; unplugging it when prompted and got the same result a couple of times. I tried one last time and am now stuck with the level needles pushed as far passed max as they could go and mostly all the octave select lights red (-3 isn't lit at all and the middle light is green). I need some help. I have almost spent all my money on this equipment and really can't afford to replace any of it. I have the extended warranty thingy for it but i'm not too sure what coverage it includes. I read some other forums when folks had similar issues with updating. I just don't know if that's what my problem is. Please help if some of this sounds familiar or you just know what i can do. Thanks. Quote Link to comment Share on other sites More sharing options...
Triryche Posted January 20, 2014 Share Posted January 20, 2014 What OS on make are you using? Quote Link to comment Share on other sites More sharing options...
Skitzolinguistiq Posted January 20, 2014 Author Share Posted January 20, 2014 Sorry, I thought I responded with my phone earlier. I guess it would't go through. Anyway, I'm running OS X Maverick. Quote Link to comment Share on other sites More sharing options...
Triryche Posted January 20, 2014 Share Posted January 20, 2014 First make sure your Mavericks is updated, it had some initial issues. Also, make sure you have newest Monkey installed. http://line6.com/software/ also, check out this link for a possible work around. Seems like this may be a Mac issue with their Fusion drives. https://discussions....772261#23772261 Please post results if you try this. If it were me I would try to see if it still works on a pc. Quote Link to comment Share on other sites More sharing options...
icorra Posted February 15, 2014 Share Posted February 15, 2014 Hi, I have the same problem but my iMac has a normal 1 TB drive at 7200 rpm. Thx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.