Spider Iv Edit Connecting Issue
Posted 24 January 2014 - 05:53 PM
Curious if i'm doing something wrong......When working with Spider Edit, I have the usb connected to my FBV Express pedal into my computer and the cat5 cable connected from the amp to the pedal,,,,,When i start the edit program it always tells me "No Line 6 device connected" It takes me quite a few open and closing of the program before it detects my amp. Is there something i'm not doing right? Thanks, Ken
Posted 01 February 2014 - 07:56 AM
I have a spider 75 amp and a PODHD500x. what is the best way to connect them. I would like to use the effect from the POD but it seem that the POD is acting like a pre-amp. Any idea's on the best way to get the most from the set-up?
You'll do better starting your own thread than posting in an unrelated thread.
2 ways to use the Pod with the Spider:
1) Guitar > Pod line out > Spider guitar input. Keep the Spider on Clean setting
2) Guitar > Pod line out > Spider CD/MP3 input. This bypasses the Spider preamp/FX section
Posted 15 March 2014 - 11:25 AM
Running it on a mac. OS X Version 10.9.2
No matter what combo of connecting and starting up Spider Edit it says no line 6 device connected.
Spider IV 75 Amp
FBV Express MKII
Tried different cables. I used the cables to run my printer and it works so cables not the issue.
Posted 17 March 2014 - 04:03 AM
The following usually works in Windows, I dont' know about Macs.
Uninstall Spider Edit and any other Line 6 software you have loaded up, including Monkey. Delete the folder titled 'Line 6' in your program files - it still contains the uninstlaled Line 6 programs files.
Re-download Monkee, then use it to to reinstall Spider Edit.