Hey guys, I recently got my UX2 and it's great stuff.
However, I have a pair of M-Audio DSM2 Studio Powered monitors hooked up to the L/R analog inputs with 1/4 cables to the UX2. I can't seem to get sound out of it. If I plug my headphones with a 3.5mm to a 1/4 adaptor into the headphone output, it works.
I understand I can try using a Y cable from my studio monitors and then plugging that into the headphone output on the UX2, but I have already spent $36 on two 1/4 cables, I'd rather not spend anymore on cables. If I can't get this to work, then I suppose I'll buy the Y cable as a last resort.
OK, on a second thought I thought I'd upload some pictures to help illustrate the situation.
OK, so this is a picture is of my current setup at the moment. You can clearly see my two studio monitors and my UX2.
This second picture is of the 1/4 cables that are connected to the analog outs of the UX2. The cable that is connected to 2/R is connected to the speaker on the right hand side of my desk. The cable that is connected to 1/L is connected to the speaker that is on the left hand side of my desk which you can see in image one. Have I plugged this in correctly?
I have also tried setting "Speakers Line 6 UX2 Device" as the default device, you can see what I mean in the picture below.
Is there something I am missing? I would surely appreciate the help as I am a beginner for recording music. I've been playing guitar for years though.