JeffersteinVS Posted March 13, 2014 Share Posted March 13, 2014 How do i stop patches from changing into electric guitar mode? I would like the l2m to stay into PA reference mode the whole time but it is switching to electric guitar mode for electric patches and is causing my sounds to be way too bright. Quote Link to comment Share on other sites More sharing options...
silverhead Posted March 13, 2014 Share Posted March 13, 2014 The latest Pod HD firmware includes a somewhat hidden capability to store Stagesource speaker mode in the HD500 preset/patch. However, the only way to set the speaker mode is by saving the HD500 preset; the current speaker mode at that instant is saved with the preset, and hence recalled when the preset is selected again later. The thing is..... the default setting for this parameter, in all presets, is Electric Guitar. So unless you manually save the HD500 preset when the Stagesource speaker is in a different mode setting (e.g. Reference) then every time you recall the preset the setting will be reset to Electric Guitar. Unfortunately there is no global setting for this; you need to manually save every preset that you want associated with Reference mode. Quote Link to comment Share on other sites More sharing options...
JeffersteinVS Posted March 13, 2014 Author Share Posted March 13, 2014 thanks man it was driving me nuts. I will hook up the stage scape and change it for every patch on the l2m and save the patch Quote Link to comment Share on other sites More sharing options...
silverhead Posted March 13, 2014 Share Posted March 13, 2014 I am speaking about the HD500 connected directly, via L6 LINK, to the Stagesource speaker. You mention hooking up the stagescape; if you mean the M20d Stagescape mixer being connected to the Stagesource via L6 LINK, with the HD500 connected via analog outputs to the Stagescape mixer inputs, then that's a different story. If that's your setup, I can't explain why the Stagesource speaker mode would be changing because the HD500 mode parameter is not passed to/through the M20d via the analog input. This mode parameter is only passed via L6 LINK directly from the HD500 to the Stagesource speaker. Quote Link to comment Share on other sites More sharing options...
Tboneous Posted July 5, 2015 Share Posted July 5, 2015 Would like your thoughts.... http://line6.com/support/topic/8315-l2m-question/?p=106780 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.