UNDEAD5150 Posted April 2, 2014 Share Posted April 2, 2014 Ive seen this topic, but never really got my answer. Ive previously owned a Pod HD Pro and used a MKII shortboard with it, then after many a gear change went through some heads, Axe Fx, etc. I was left with my X3 Pro and original FBV Shortboard. Recently acquired another HD Pro trying to use the FBV Shortboard with it and having issues. The board sees the process and everything is lit up, but it seems the board only controls the stomp boxes for each preset. Im not sure if this is normal behavior or if there is a means to change a settings for the shortboard to control the presets. Make sense? Again, this is the FBV Shortboard(not MKII) with Pod HD Pro. Quote Link to comment Share on other sites More sharing options...
phil_m Posted April 2, 2014 Share Posted April 2, 2014 It sounds like you have the HD Pro in "FS 5-8" mode rather than "ABCD" mode. If you want to be able to switch presets immediately, you'll want to be in "ABCD" mode. This can be selected on Page 1 of the Setup menu. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.