Springo Posted April 7, 2014 Share Posted April 7, 2014 I have a Spider Valve MKII and I am always forgetting how to access the wahs and the noise gate. Can I get a little help for this? Thank you! Quote Link to comment Share on other sites More sharing options...
napynap Posted April 10, 2014 Share Posted April 10, 2014 I usually connect it to a computer and use the SV MkII Edit software to access and try those features, because it's easier to see on a big monitor. However, here's some excerpts from the user manuals on how to do that from the controls on the amp: GATEIf you press the right arrow from the Reverb screen, you’ll see the Gate screen. Your GateMode choices are Off (Gate is disabled), Gate (a standard noise gate), NR (a frequencydependent noise reduction) or Gate+NR (both Gate+NR together). You can also adjustThreshold and Decay settings. Gate parameters are saved with the individual preset.WahBut wait, that’s not all... You’ll also see a new Wah menu where you can now select from among the factory Vetta Wah, and several additional, classic Wah Models! Press the Presets knob to enter Edit Mode and use the L/R arrows on the 4-way Nav Disc to access the WAH menu, found between the BOOST and VOL menus. All the Wah Models are available for your choosing via the Model - Select option. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.