tedthebear Posted May 2, 2014 Share Posted May 2, 2014 Hi there! I just got my JVT69 and HD500x and i have been wading through manuals and watching video tutorials but can't find anything about using the JTV and HD500x and especially anything in depth regarding connections. Is it possible to run the magnetic pickups of the JTV69 using just the pre amps into my Mesa Boogie 395 stereo valve power amp and the Variax acoustic models into the PA seperately? Is anyone using a similar set up? Any advice would be cool thanks! Quote Link to comment Share on other sites More sharing options...
jandrio Posted May 5, 2014 Share Posted May 5, 2014 input 1=variax mags input2=variax path a=HD500x pre, last FX Loop with 0 return path b=acoustic mixer hard pan 100%L + 100%R select acoustic model on variax. connect FX send TRS STEREO out to Mesa Boogie 395 stereo valve power amp connect right 1/4" (or XLR) out to PA u cld also send a STEREO signal 2 PA, just put at leat one stereo FX block AFTER the mixer (note that mixer R is now centered and L is muted). other possible layouts exist, pls try attached 'n adv if ok... tedthebeardemotones.zip 2 Quote Link to comment Share on other sites More sharing options...
arislaf Posted May 5, 2014 Share Posted May 5, 2014 You rock!!! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.