MistaSinistra Posted June 4, 2013 Share Posted June 4, 2013 Hey,my problem is that the buttons:SaveEditCompStompMod DelayCab/A.I.RTapall the selection buttons on the bottom side of the displaydo not work!simply the Tune system button does work.Now it can't be that all the buttons are broken, there has to be some other issue.I've bought the device from a friend which had it connected to his computer. At his place those buttons DID WORK.Now can it be that somehow, because he used the editor software, the device disabled those buttons and got stuck in that mode?Also when I try to reflash the USB firmware, it says that it failed to authorize the firmware.PLEASE HELP ME :( Quote Link to comment Share on other sites More sharing options...
toneman2121 Posted June 4, 2013 Share Posted June 4, 2013 what does monkey say about which versions are installed? Quote Link to comment Share on other sites More sharing options...
MistaSinistra Posted June 4, 2013 Author Share Posted June 4, 2013 newest versions are installed!3.04 firmware1.14 USB firmware or downgrade to 1.12 didn't work either.usb driver is also the newest! Quote Link to comment Share on other sites More sharing options...
toneman2121 Posted June 4, 2013 Share Posted June 4, 2013 did you also try re-flashing the memory? try that in safe mode. hold down the left soft key while powering on. Quote Link to comment Share on other sites More sharing options...
Triryche Posted June 4, 2013 Share Posted June 4, 2013 Is it possible one of the buttons is stuck? Quote Link to comment Share on other sites More sharing options...
Powerglide350 Posted April 14, 2015 Share Posted April 14, 2015 I am having the same problem. Any luck? Quote Link to comment Share on other sites More sharing options...
BillBee Posted April 15, 2015 Share Posted April 15, 2015 If you have tried all of the above and it still doesn't work. You "could" try opening it up and seeing if the display (daughter board) ribbon cable worked itself loose and may need reseating. Just an idea prior to seeing about taking it in for service. Quote Link to comment Share on other sites More sharing options...
aaron__aardvark Posted April 26, 2015 Share Posted April 26, 2015 I owned a Bass Pod (non-XT), where after about 2 years I couldn't edit ANYTHING, only could go through factory presets. Took it to an authorized repair shop & they said it would cost roughly $120US, & didn't guarantee it would fix the problem. I bought a new Bass PodXT instead, no problems after several years & more, better sounds overall. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.