Musik101 Posted July 1, 2014 Share Posted July 1, 2014 Ok so I did like the knowledge base video suggested and ran a cord from my guitar to the guitar input in the back of the POD. Then ran a cord from the L/Mono to the input of my amp and changed my setting on the POD to "combo front", buuuuuuuut nothing happens. No sound what so ever. Also, the selector on the 1/4" out was also switched to "amp". The amp and pod works fine individually, but I can't get it to work with my amp. Am I blatantly missing something??? Thanks, CF Quote Link to comment Share on other sites More sharing options...
Musik101 Posted July 1, 2014 Author Share Posted July 1, 2014 Also, I tried to connect it to an old Laney amp. No results there either. Quote Link to comment Share on other sites More sharing options...
napynap Posted July 9, 2014 Share Posted July 9, 2014 Based solely on your description of the problem, I would focus on either a misconfigured POD output setting or a bad cable from POD to Amp. Quote Link to comment Share on other sites More sharing options...
WolfgangZenk Posted August 25, 2014 Share Posted August 25, 2014 Hi, you must put the cable from the POD Output to "Power Amp in" of the Valve. Then die POD 500X works very good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.