Jump to content


Photo

Problem with FBV express MKII & remote app

fbv express amplifi

  • Please log in to reply
6 replies to this topic

#1 efxtr

efxtr

    Just Startin'

  • Members
  • Pip
  • 29 posts

Posted 06 July 2014 - 12:08 PM

After updating to new firmware (1.01) and app (1.2), fbv express changes preset to A, B, C, D of only bank 1.
Whenever I try to change preset via ios app (ie bank 3, preset B ), tone changes accordingly but when I use fbv express to change the preset after selecting the bank with ios app (let's say preset C of current bank) it automatically loads preset (ie C or which button you pressed) of bank 1.

So,

Selecting Bank 3 - Tone B via ios app -> amplifi loads the tone properly -> Push the button C of fbv express mkii -> ios app and amplifi loads the Bank 1 - Tone C instead of Bank 3 - Tone C

So, currently I can use fbv express mkII only with first bank, limited with 4 presets. Anyone with same experience?
  • 0

#2 pob41

pob41

    Just Startin'

  • Members
  • Pip
  • 6 posts

Posted 06 July 2014 - 02:20 PM

Yes, that's how mine is working too. Any solutions?
  • 0

#3 marcoslupo

marcoslupo

    Just Startin'

  • Members
  • Pip
  • 7 posts

Posted 09 July 2014 - 03:45 AM

Yep same here, would like to understand if the Express MkII will carry more functionality with the new App and amp firmware (as intimated towards in the Amplifi Remote update notes on the App Store).
  • 0

#4 efxtr

efxtr

    Just Startin'

  • Members
  • Pip
  • 29 posts

Posted 09 July 2014 - 06:00 AM

Let's make Line 6 hear us better via their ideascale site.

 

Better integration with FBV Express mkII

http://line6.ideasca...II/640195-23508


  • 3

#5 rodrigocmn

rodrigocmn

    Just Startin'

  • Members
  • Pip
  • 5 posts

Posted 11 July 2014 - 07:27 AM

Better integration is definitely a priority! I've just contributed with my vote! 


  • 0

#6 efxtr

efxtr

    Just Startin'

  • Members
  • Pip
  • 29 posts

Posted 11 July 2014 - 07:56 AM

Better integration is definitely a priority! I've just contributed with my vote!

Thanks a lot
  • 0

#7 efxtr

efxtr

    Just Startin'

  • Members
  • Pip
  • 29 posts

Posted 22 July 2014 - 12:15 AM

Dear all,
I opened a ticket and just be informed by a support team member as below. I asked about future firmware update for this issue and I'll inform you as soon as I get the answer.

Quote:

....this is a current limitation of the AMPLIFi Remote app and FBV controller integration. When the AMPLIFi Remote app is in use, it will be responsible for changing presets and banks outside of presets 1A, 1B, 1C, and 1D which are assigned to the FBV Express MKII footswitches. Therefore presets locations 1A, 1B, 1C, and 1D will always be assigned to the footswitches on your FBV Express MKII and the remaining preset locations will only be accessible from the AMPLIFi Remote app.
  • 0





Also tagged with one or more of these keywords: fbv, express, amplifi

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users