randychesbro Posted July 11, 2014 Share Posted July 11, 2014 Im having a little trouble with having the L3t connect to my HD500 using the L6Link. I did go purchase a data/dmx cable for it today but ended up with the same issue as when using a good mic cable.. Is there a step by step process I need to do to have it connect every time? it seems random. If i turn off the HD500 to reset it and back on it doesn't connect to the L3t I reed turning them off and on but no go. If i leave it off for a bit and then on it connects. I worried that if I'm out giving and the power goes off or whatever happens then I can start back up and running quickly. anyways if there is a process I need to do to have them connect every time please let me know. side note. If I go xlr out of my Hd500 can i go to the line input at the top where the rca inputs are? I know it works but its way lower volume. am I not supposed to do that? thanks Quote Link to comment Share on other sites More sharing options...
Tboneous Posted July 11, 2014 Share Posted July 11, 2014 Are you turning on the pod first, letting it finish booting and then turning on the L? Quote Link to comment Share on other sites More sharing options...
zaphodboy Posted July 11, 2014 Share Posted July 11, 2014 I use a DMX cable to run from my HD500 to an L3m. First I turn on the pod, let it boot then turn on the speaker. I don't know if there is an 'official' order to boot them but this works first time, every time for me. Good luck. Quote Link to comment Share on other sites More sharing options...
randychesbro Posted July 11, 2014 Author Share Posted July 11, 2014 Maybe I wasn't waiting long enough. I guess i figured it would recognize it like USB, plug it in and it see it. Another Question. If i go into the L3t inputs It sounds like I plugged into a sound board directly with all the high end nasty grit. is there a setting I need to change? thanks Quote Link to comment Share on other sites More sharing options...
Tboneous Posted July 11, 2014 Share Posted July 11, 2014 You may need to change your output settin on the HD. Quote Link to comment Share on other sites More sharing options...
zaphodboy Posted July 12, 2014 Share Posted July 12, 2014 Maybe I wasn't waiting long enough. I guess i figured it would recognize it like USB, plug it in and it see it. Another Question. If i go into the L3t inputs It sounds like I plugged into a sound board directly with all the high end nasty grit. is there a setting I need to change? thanks Again, I'm not sure what the L6 official settings are supposed to be but I have mine set with the POD in 'studio/direct' and the L3 in 'electric guitar' mode. To my ears this gets rid of all the nastiness. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.