jhschmitt Posted July 11, 2014 Share Posted July 11, 2014 This is a long shot, but maybe someone knows a solution. While we were away, our power line was hit by lightning. Even though it was on a surge protector, my Spider IV 150 was affected. (Just for reference, another surge protector also let me down while the RCA (yes RCA) unit we had for the washer/dryer sacrificed itself but protected the electronics in those appliances). Anyway, now the Spider never fully boots up. It turns on, then the display just cycles around every 8 seconds with a flash. I tried resetting by pressing A while powering up, but no luck. I tried connecting via the MkII but, no surprise, the Monkey never sees the Spider. I'm hoping I just need a way to completely reload the firmware. Is that at all possible for a reasonably technically competent end user? Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted July 11, 2014 Share Posted July 11, 2014 I'm afraid you'll need to bring it to an authorized service center - there may be components burned out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.