RogerGPan Posted July 31, 2014 Share Posted July 31, 2014 Does the POD HD Pro X not receive MIDI-Clock? Is there no way to set the Tempo for the FX from my DAW instead of tapping it in (via the tap btn)? Quote Link to comment Share on other sites More sharing options...
phil_m Posted July 31, 2014 Share Posted July 31, 2014 It does receive MIDI clock. Are you having problems trying to get it to respond. Quote Link to comment Share on other sites More sharing options...
chimp_spanner Posted July 31, 2014 Share Posted July 31, 2014 It does - you just need to instruct your DAW to transmit MIDI clock information. In Cubase this is in Transport -> Project Synchronization Setup but you might need to consult the manual for your sequencer to find this option. I've got mine to work, although it lags behind the click somewhat, which I can't quite figure out how to fix. Maybe you could offer some insight Phil (sorry to hijack!) Quote Link to comment Share on other sites More sharing options...
RogerGPan Posted August 1, 2014 Author Share Posted August 1, 2014 Ah ok thanks! The expert manual doesnt mention anything about MIDI Clock. Chimp, well thats lollipop too then. You cant pull forward (or delay) the clock signal in your DAW like you can with normal MIDI tracks, can you? The expert manual on paga 131 under supported MIDI commands says this: CC064 64~127= Tap Tap Tempo – Activation I'm not sure what that means, but sounds like you could emulate pressing the Tap-Btn by sending CC64 from your DAW, so you could try to send them rhytmically on every quarter note, but then the beat/bar position still might not fit with the DAW Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.