Mangomusic Posted September 7, 2014 Share Posted September 7, 2014 Hi everybody, My name is Paul. I have a question 'bout the POD 2. Can i go back to the factury presets which are in the nine banks abcd. I have an semi acoustic hollow body guitar. What can be a good setting for simple chord strumming to sing with. Hope You have answers for me. Paul Quote Link to comment Share on other sites More sharing options...
BillBee Posted September 8, 2014 Share Posted September 8, 2014 Hi Paul and welcome to the L6 board :) For a factory reset: POD/POD 2.0/Bass POD/POD Pro: press and hold the up and down arrow buttons as you power the unit on for ~ 5-7 seconds or until it goes to the preset 1-A For a clean electric/acoustic setting... hmmmm... perhaps the Black Panel model or the Jazz with little gain, sprinkle in some compression but don't have the gain too high there either. Mix in some chorus or reverb. I would recommend you give the ole manual a good read and try out the L6 Edit software. Tweak some of the existing patches and get a feel for where the models lead you. Some are really over the top in effects or high gain btw. After you get familiar with the interface L6 Customtone has lots of Pod patches and there are some pretty decent electric/Ac patches in there. http://line6.com/software/?submit=Show%3A&hardware=All&name=Line+6+Edit&os=All -Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.