jonhollis Posted September 22, 2014 Share Posted September 22, 2014 i was wondering if this would work (i think it should) guitar into pod hd pro x. effects send L and R into channel A and B of tube amp. FX send from tube amp into pod FX return L/mono. then O/P of POD into FX return on the tube amp. the reason is to use the pod as a ABY box to select the clean and dirty channels of a tube amp - but in the right part of the signal chain. I'm sortve presuming i might have to put a pan box in the chain before the FX loop to pan it to either channel A (left channel) or B(right channel) anyone tried this? will it work? Quote Link to comment Share on other sites More sharing options...
radatats Posted September 22, 2014 Share Posted September 22, 2014 channel A and channel B in the POD are each separate stereo paths. No matter where you place the FX Loop it will send both left and right signals to your amp if you connect like this. I don't think you can do what you are describing. Quote Link to comment Share on other sites More sharing options...
jonhollis Posted September 22, 2014 Author Share Posted September 22, 2014 but if i pan everything to the left it will only be on the left channel, no? so the fx loop send out the back of the machine is L and R so L to channel one and right to channel 2. Quote Link to comment Share on other sites More sharing options...
radatats Posted September 22, 2014 Share Posted September 22, 2014 There is a miscommunication here. Placing a pan in front of the FX block actually might work. But you are not panning between channel A and channel B, just left and right signal data. When you set up two channels in the POD they are separate and independent and each is its own stereo path. Its not right on A and left on B unless you specifically build the patch to do that. Give it a shot, it can't hurt anything... Quote Link to comment Share on other sites More sharing options...
jonhollis Posted September 22, 2014 Author Share Posted September 22, 2014 Sorry I worded it badly. Channel a and b I mean in the amp. I'm going to give it a go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.