wsgarner Posted September 24, 2014 Share Posted September 24, 2014 I'm sure this question has been asked 100 times, but I can't seem to get the correct search to find it. I have an M13 that I want to use as the Master for Midi Clock to my HD500. I connect a Midi cable, M13 out to HD 500 in, and tap the M13. The HD500 recieves the new tempo tap with no problems but quickly drifts away. I'm assuming that the M13 is only sending the taps through Midi as I tap and once I stop the HD500 drifts back to the preset tempo. There has got to be a way to over come this in the setup of the HD500 or M13, but I can't figure it out. So, how do I get the HD500 to hold the new tap signal sent from the M13. It gets the new tempo so it should be able to hold it! Thanks, Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.