Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Recommended Posts

I've had the UX2 for quite sometime and never got a footswitch for it it so I decided to make one . Since I have the basic hand tools. a drill/drills, soldering iron/related tools, light wire and quarter inch 6 ft guitar cables all I needed was 2 quarter inch mono jacks, 2 momentary switches (light duty) and a box all of which I found at Radio Shack. I added 1 more switch and jack so I can run to something else tha'll use a momentary switch. It works great and It makes the UX2 so much better.

 

GearBox TonePort Setup PDF

 

Rowbinet's YouTube video about using the software

 

Momentary%20Switch.jpg?psid=1

  • Upvote 1
Link to comment
Share on other sites

In case anyone has a similar issue. I've noticed that when I start up my computer and open GearBox the footswitch doesn't work. So after a while trying to get it to go I found that if I open Line 6 MIDI Device control panel and then open GearBox it all works. I'm using Win7 and all latest drivers and program. Carry On!!! :)

Link to comment
Share on other sites

You have 3 switches there btw :) Any wiring other than 1 switch to 1 jack?

 

-B

 

Thanks BB. Schnazzy, now there's a word I haven't heard in a while, cool word. The other switch I put in there for another use such as channel change for the DT50 Head. I still have to go get another mono quarter jack, later I'll drill another hole in the back and wire it up. I should've stocked up on the hardware, lol.

Link to comment
Share on other sites

Thanks BB. Schnazzy, now there's a word I haven't heard in a while, cool word. The other switch I put in there for another use such as channel change for the DT50 Head. I still have to go get another mono quarter jack, later I'll drill another hole in the back and wire it up. I should've stocked up on the hardware, lol.

 

You are lucky you still found a Radio Shack that had some parts :)

 

-B

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...