UX1 to Mixlr (UX1 as a analog/digital convertor)

[bombidol]

Weird question. I want to use my UX1 Toneport to stream digital radio with a vinyl source.   I have two turntables wired into a DJ mixer, then RCA out of the (record) output (line level) into the MONITOR IN on the UX1, I have tried the 2 Analog ins on the UX1 too.

If I plug headphones into the UX1 I can hear the music coming from the records. However, I need to be able to send that signal back out the USB cable and into the computer (the Mixlr software, which sees the UX1 as a soundcard)

 

Any ideas how to do this or am I barking up the wrong tree?

[Triryche]

Not familiar with that software, do you know if it supports ASIO?

 

Also, you might want to use both Line In's to preserve stereo from the turn tables.

[bombidol]

It supports ASIO yeah. The

Monitor in on the UX1 is stereo a and if all else fails I can run the analog in quarter inch jacks side by as as 1/2 L/R.

I read reports that maybe the Ux1 doesn't send anything from the INs back through the USB cable. Only from the guitar and mic ports. ??

[Triryche]

You can definitely send the 2 ins via USB.

 

Go into Pod Farm to select Line1 and Line2.

 

I usually make a dual path and select Line 1 for Tone A and 2 for Tone B and pan them hard L/R in the mixer view.

[bombidol]

Powered up Farm. It wont take signal from the Stereo in. But it will take signal from 1+2 SOMETIMES, it seems to drop the signal every few minutes. Weird as hell.