These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by rteuman on 2013-04-19 10:34:20

I have the UX1 and i bought a microphone , and when i learned that there wasn't any "phantom power" so i bought ART Tube MP Studio Mic Preamp . It still doesn't works. First , when i connect the adapter to the preamp, the lights were on but after a few seconds lights went off and there was a smell of burning, then i realized that the adapter was burned. That's because i live in Turkey, and i know that i have to plug the adapter with a thing that lowers the electricity . The adapter burned but there weren't any smell coming from my preamp. After , i plugged my other 9V adapter which doesn't have any problem. The lights came back but there's still no voice. I plugged the microphone cable to the input and the output cable was plugged to my pod studio. The analog meter wasn't moving. Maybe i didn't plugged everything well? I even tried on the guitar but the result was same.

Here , i took some photos to show you if it's correct or not:

this is the input ,

IMAG0701.jpg

which goes to the microphone :

IMAG0702.jpg

and this is the output ,

IMAG0699.jpg

which goes to the pod studio:

IMAG0700.jpg

are there any problems? might some of the electrical circuits inside of the preamp was burned? help me please



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by TheRealZap on 2013-04-19 10:47:57

you have to go into the control panel and change the input on the UX1... a thought, have you done that?



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by rteuman on 2013-04-19 11:05:24

TheRealZap wrote:

you have to go into the control panel and change the input on the UX1... a thought, have you done that?

Sorry , which control panel ?



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by rteuman on 2013-04-19 11:29:55

I didn't understand you mean the line 6 monkey ?



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by TheRealZap on 2013-04-19 11:32:42

if you have the line6 drivers installed, there will be a line6 audio/midi applet in your control panel or system preferences.



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by rteuman on 2013-04-19 11:52:33

I've changed the midi input to UX1 , am i right ? bu it still doesn't works. I realised that there's a little button which has to be turn on green when the preamp is workin, bu i see no color there.



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by TheRealZap on 2013-04-19 12:19:22

don't think you're in the right place...



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by rteuman on 2013-04-19 12:24:49

Okay i think there's a problem inside the preamp , i'll give it to someone to fix it



Re: Pod Studio UX1 and ART Tube MP Studio Mic Preamp
by TheRealZap on 2013-04-19 13:45:28

i just think that the UX uis reading from the guitar input.... you have to use software to switch the input....

its in the control panel on your windows computer (only line6 thing in there) and its in your system preferences if its a mac....




The information above may not be current, and you should direct questions to the current forum or review the manual.