These forums are read only, please use our new forums here.

Main :: POD 2.0, PODxt Family, Pocket POD, FloorPODs



Firmware update keeps failing again and again
by enzo2025 on 2009-08-22 03:22:06

Hi, I'm trying to update via Line 6 Monkey my Guitarport from 2.05 to 2.07. The new one is said to add Mic Pre and Bass Models so I'm very interested in updating it.

When I try to update it, this is what appears:

Updating USB
Firmware: requesting firmware....
Writing...
Error

And the a pop-up appears saying:

GuitarPort update failed.

(Code 80007105) Firmware verify failed. PLEASE turn the device OFF and on again.

Try the update again, making sure the cables are still connected.

Well I've done this several times without success.

What do I have to do to solve my problem?

Thanks in advance.



Re: Firmware update keeps failing again and again
by Kneehow on 2009-08-24 09:16:17

The next thing you should try is disconnecting the GuitarPort hardware from the first USB port on the computer you were using and use a different USB (try them all, if you still get that message) until you find a port that yields success for you.

You might need to try a different USB cable, too.



Re: Firmware update keeps failing again and again
by enzo2025 on 2009-08-24 09:33:59

Hi, tanks for the info, but I've done that and happens the same thing...if I change the USB port: error, if I change the cable: error.

Is there another way of upgrading the firmware, or getting the bass exapnsion as well as the Mic pre's ?

Thanks again.



Re: Firmware update keeps failing again and again
by ricksox on 2009-08-25 11:31:30

Hello,

You may have a hardware issue with your device. The best way to determine this would be to connect your GuitarPort device to a different computer. Is that possible for you to do?

Line6Miller



Re: Firmware update keeps failing again and again
by racersedge52 on 2011-03-20 12:20:19

i have the same problem; nothing fixes including changing usb ports and different computers.  there should be a fix to this somewhere.



Re: Firmware update keeps failing again and again
by MichaelWilliam31 on 2011-07-25 01:17:18

I too am having the same problem and have also tried the same rememdies




The information above may not be current, and you should direct questions to the current forum or review the manual.