These forums are read only, please use our new forums here.

Main :: POD Pro



Pod Pro to computer interface
by reichspeed on 2009-03-17 12:26:03

I have been trying to get my Pod Pro to communicate with the Line 6 Editor program. I purchase a midi interface (E-MU Systems Midi 1x1), uploaded the disk, got rid of all my Java files, uploaded Line 6 Editor which, as claimed, reloaded Java, checked my cable 100 times, have the Pod Pro set to Midi on Channel 1. Still can't get the editor program to communicate with the Pod Pro. I tried to download the Monkey program but it tells me it does not have anything available for my model. Another thing I noticed is that the Line 6 editor pull down menu does not include the Pod Pro as an option. So I'm a bit stuck here. All I am trying to do is to view my presets on my computer. Must be a way...

Please advise,

Bud Reichard



Re: Pod Pro to computer interface
by LoonyBin-Fizzbin on 2009-03-17 12:34:53

Just curious!!  Have you tried the "SoundDiver" editor?

http://line6.com/software/



Re: Pod Pro to computer interface
by reichspeed on 2009-03-17 12:50:44

No I haven't. Where do I find that??


Bud



Re: Pod Pro to computer interface
by reichspeed on 2009-03-18 02:24:21

Okay, I found the Sound Diver on the disk that came with the Pod Pro. I downloaded it and hooked everything up and I still can not get the Pod Pro to communicate with either the Line 6 editor or the Sound Diver.



Re: Pod Pro to computer interface
by LoonyBin-Fizzbin on 2009-03-18 02:55:36

http://www.emu.com/support/files/download2.asp?Centric=1009&Legacy=0&Platform=1

First Id start by getting the Latest drivers for the Midi interface!

Then go here to get the latest "Sounddiver" :  http://line6.com/software/

"Version 3.0
Released 6/27/03

Works with:
Bass POD
Bass POD Pro
Flextone II
POD
POD 2.0
POD Pro"

Note: this software is presented for archival purposes and is no longer supported.

SoundDiver gives you deep editing control of POD from your computer.
SoundDiver version 3 supports Bass POD Pro, as well as POD, POD 2.0, POD Pro, Bass POD and Flextone II!

MD5: 93fb3372447e4e7d464349175a1a370d
OS: Windows XP, Windows 2000, Windows ME, Windows 98SE

Then get Midiox, A Midi Monitor (among other things) to see if you are indeed sending Midi out of the POD!  : http://www.midiox.com/

All this to eliminate the "Software" as the issue!

Another Note, remember that the Midi Out goes to the Midi in! Both ways! And that your Device in soundiver will not be seen under the Pods name but the actual name of the Midi interface!



Re: Pod Pro to computer interface
by ricksox on 2009-03-20 13:00:43

Hi,

As Loony mentioned, make sure that your drivers for your MIDI interface are updated and installed properly.

Next, make sure to download the latest version of Line 6 Edit (3.02) as this is compatible with your POD.

Double check your cables too. Some MIDI devices require that you connect the IN to the IN and the OUT to the OUT.

Line6Miller

Please be sure to award Helpful and Correct points to community members who respond with helpful or correct answers!




The information above may not be current, and you should direct questions to the current forum or review the manual.