These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



UX8 turns on, cannot connect, and can't turn off
by lemonator on 2009-11-08 22:17:47

Hello,

I have a UX8 that suddenly stopped working, when i pluged a guitar in INST, port 1

What happened,  is that the UX suddenly froze, some clip lights were on, others were dim red, it simply felt like my system was twitching.

So i tried to turn it off, but it didnt work.

I unpluged it and when I pluged it back in and turned it on, the clip lights were going form left to right  ( the two clip lights next to the meters were not on nor were they flashing).

and i cannot turn it off, so I have to unplug it again..

I thought it was a tough piece of hardware..

Can anybody please tell me what has gone wrong?

thanks!

Hiro

( Sorry for the double post)



RE: UX8 turns on, cannot connect, and can't turn off
by ricksox on 2009-11-13 09:54:43

Hello,

Those little red clip lights blinking back and forth like that are an indication that you lost your driver connection between the computer and the UX8. I'd suggest running Line 6 Monkey and reinstalling a fresh set of UX8 drivers.

Let me know if that helps. Thanks.

Line6Miller



Re: RE: UX8 turns on, cannot connect, and can't turn off
by lemonator on 2009-11-14 22:48:55

Hello, and thank you for your reply

It didn't work, also, I can't seem to close the machine. It doesent even turn off when i turn the power off. I litteraly have to unplug it.

any other suggestions?

Thanks!



RE: UX8 turns on, cannot connect, and can't turn off
by ricksox on 2009-11-16 10:54:42

Hello,

If you unplug the UX8 via USB does the power button turn the UX8 on and off?

Line6Miller



Re: RE: UX8 turns on, cannot connect, and can't turn off
by lemonator on 2009-11-16 17:10:46

Nop, it does not turn off.

thank you



RE: UX8 turns on, cannot connect, and can't turn off
by ricksox on 2009-11-17 10:07:56

Hello,

If the UX8 won't turn off at all then you have a hardware problem and you'll need to have it repaired.

Where did oyu purchase the UX8?

How long have you had it?

Line6Miller



RE: UX8 turns on, cannot connect, and can't turn off
by ricksox on 2009-11-20 08:48:41

Hello,

It's been a couple of days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to open a new question with us and we will answer your questions accordingly. Thanks!

Line6Miller




The information above may not be current, and you should direct questions to the current forum or review the manual.