These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



WAH and POD Studio UX2
by GotMetalBoy on 2009-12-08 09:51:44

Is there a way to control the POD Farm WAH w/ a UX2?  It looks like the 2 foot switches can only use on/off pedals and not an expression pedal.



Re: WAH and POD Studio UX2
by GotMetalBoy on 2009-12-08 10:14:38

Ok so I may have found a solution here > http://line6.com/community/docs/DOC-4145

Doesanyone know if or when Pod Farm will be able to receive MIDI?

What's the difference between GearBox and POD Farm?  I used to use GearBox w/ my POD X3L, so can I use my UX2 the same way and just use my Boss GT-8 MIDI out to control it?

Thanks,

Lou



RE: WAH and POD Studio UX2
by Line6Hugo on 2009-12-16 16:59:04

POD Farm MIDI functionality is not yet available to use with the software.

Also, Gearbox will not allow you to use 2 Tones on one signal input like POD Farm can.

You can just use the UX2 with Gearbox, set the MIDI Preferences to receive MIDI from your MIDI interface and use the Boss GT-8 as your controller as long as you program it to send the proper MIDI messages as specified in the MIDI CC Reference Guide:

http://line6.com/data/l/0a060072c8d347743de40453f/application/pdf/MIDI%20Continuous%20Controller%20Reference%20(Rev%20E)%20-%20English.pdf

Regards,

Line6Hugo



RE: WAH and POD Studio UX2
by Line6Hugo on 2009-12-21 09:50:58

Hello,

It's been a few days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to re-open this thread or create a new question with us and we will answer your questions accordingly. Thanks!

Regards,

Line6Hugo




The information above may not be current, and you should direct questions to the current forum or review the manual.