These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



Why won't my Microphone be acknowledged....
by williamjackson57 on 2010-03-12 22:59:07

Why won't my Microphone be acknowledged when i plug it in.I can play drums or any midi based sound but i can't the mics to work or a guitar (this is all on a KB37 with a mac using logic pro).I can get drums and all the rest of the midi and NO AUDIO???I've downloaded a bunch of drivers too.



RE: Why won't my Microphone be acknowledged....
by Line6Hugo on 2010-03-15 14:46:12

William,

You can change the source select on the KB37 from Instrument input, to Mic, to Line inputs from the Source select drop down in Gearbox/POD Farm or on the 'Inputs & Recording' tab of the Line 6 Audio-MIDI Devices utility in your Mac preferences.

Also, please go over the following POD Farm Recording Setup Guide starting on page 5.16 for more setup info:

http://line6.com/data/l/0a06007211cf84911ce83d02af/application/pdf/POD%20Farm%20Recording%20Setup%20Guide%20(Rev%20A)%20-%20English.pdf

Regards,

Line6Hugo



Re: RE: Why won't my Microphone be acknowledged....
by williamjackson57 on 2010-03-17 14:04:21

Hi I don;t use gearbox farm for anything I use logic pro do i have to have gearbox farm installed in order for the MIc and the Guitar inputs to work??I've lost the CD shall i download it from here which is the right stuf to have download and install i did all the drivers but all i can get right now is Midi.



Re: RE: Why won't my Microphone be acknowledged....
by jdanderson on 2010-05-21 17:12:53

Hi,

I think I got how to get the mic acknowledged thanks to your help but now I'm stuck trying to get my DAW to see both my guitar input and my mike at the same time. If I have run my KB37 through Podfarm, which I understand, then why is it that it appears I can only use one input at a time.I bought the KB37 because of all its inputs. How do I use more than one to a DAW?

Thanks,

Jeff



Re: Why won't my Microphone be acknowledged....
by tyson1989 on 2013-01-15 13:11:46

i cant figure out how to use multiple inputs on this either..did you ever get it figured out?




The information above may not be current, and you should direct questions to the current forum or review the manual.