These forums are read only, please use our new forums here.

Main :: POD 2.0, PODxt Family, Pocket POD, FloorPODs



Pod XT Live Volume problem
by stompbox94 on 2009-04-02 03:58:57

When I selct a preset it runs fine for a short time (about 30 seconds) and then the volume for that preset automatically switches to the volume to which the "Chan Vol" knob is turned. This happens without fail although the interval between switching patches and the volume change seems to change. Any suggestions?



Re: Pod XT Live Volume problem
by toneman2121 on 2009-04-02 05:55:50

what happens if you keep your vol. knob at zero?



Re: Pod XT Live Volume problem
by stompbox94 on 2009-04-02 06:02:41

If I keep the volume knob at zero, the volume drops to zero after 30 seconds or so.



Re: Pod XT Live Volume problem
by toneman2121 on 2009-04-02 06:08:06

what i would try is spraying electronics contact cleaner into the pot and rotate it back and forth several times. you should take it apart to get better access to the pot. the knobs might not come off so easily.



Re: Pod XT Live Volume problem
by Jeraxle on 2009-04-02 06:11:06

+1 to what toneman2121 said..  You might also want to reflash your firmware.



Re: Pod XT Live Volume problem
by stompbox94 on 2009-04-02 06:14:12

I have tried reflashing the firmware.

I will take it apart and claen it when i am feeling brave. thanks



Re: Pod XT Live Volume problem
by geeker on 2009-04-02 06:22:08

My MID knob was doing the same thing. I thought it needed cleaning but the pot was actually bad. I sent mine in for repairs and now evrything works fine. I think you send it in to get fixed.




The information above may not be current, and you should direct questions to the current forum or review the manual.