These forums are read only, please use our new forums here.

Main :: FBV MkI / MkII Controllers



FBV express lights and pedal problem
by Daleg1940 on 2010-10-19 11:23:16

I have a FBVexpressMK11. The four A-D pedals, work for changing ,the channels,but the tuner and volume wah pedal does not work. The tuner lights flash on when first turned on ,but that is all .Is this ,a software problem,or is this a component problem.



RE: FBV express lights and pedal problem
by ricksox on 2010-10-21 09:49:22

Hello,

Have you updated the firmware on the pedal? Have you calibrated the pedal?

If not, here is some documentation that will help you do that:

http://line6.com/community/docs/DOC-1652

http://line6.com/community/docs/DOC-4501

Line6Miller



Re: RE: FBV express lights and pedal problem
by Daleg1940 on 2010-10-21 12:21:35

I have reinstalled all the updates you suggested,and have recalibrated as shown on the web site.  It done just as it was supposed to to calibrate,but the pedal lights still do not work,nor does the tuner function, or pedal for wah and volume. Thanks for all of your help.



RE: FBV express lights and pedal problem
by Line6Hugo on 2010-10-22 08:47:31

Daleg1940,

If you updated the pedal and attempted to calibrate, but the problem persists, there must be a hardware problem with the FBV. You should contact our service department for a replacement if you purchased it new from an authorized Line 6 dealer within one year:

(818) 575-3600

Regards,

Line6Hugo



Re: RE: FBV express lights and pedal problem
by Daleg1940 on 2010-10-22 13:28:49

Thank you for all of your help.I bought this from Musiciansfriendas may need repair or replacement,so I dont belive there is any waranty.I appreciate all of your help you have given to me.I will have to buy a new one to replace this one




The information above may not be current, and you should direct questions to the current forum or review the manual.