These forums are read only, please use our new forums here.
Spider 3 amp turns on but no thud or sound
on 2010-11-10 20:33:47
I've this spider 3 for about 7 months and play it fairly well everyday. Today I went to go play it and it turned on with no thud or sound. I changed my lead and still no go. The amp has sound when I plug in the earphones otherwise there is no sound; not even static noise when up full blast.
All the LEDs and tempo lights flash with all the sounds still there however no sound comes out.
RE: Spider 3 amp turns on but no thud or sound
on 2010-11-11 14:22:39
Have you tried a factory reset on the amp?
Hold down the A (or clean) button as you turn on the power and hold the button for 5-8 seconds.
Line 6 Customer Support
Re: RE: Spider 3 amp turns on but no thud or sound
on 2012-10-10 22:43:53
I have the same problem. I can hear something turn on, but it's not the usual 'thud'.
I checked the connections on the speakers and it all looks fine.
I have also tried the factory reset.
The information above may not be current, and you should direct questions to the current forum or review the manual.