These forums are read only, please use our new forums here.

Main :: Stompbox Modelers / ToneCore



DL-4 Repeats Knob
by Samitch04 on 2011-01-06 09:04:42

I have a DL-4 and the repeats knob has become completely unresponsive, i have tried resetting it to factory resets using an expression pedal but it still has no response. so i am stuck on the preset amount of repeats.. any advice or dose the knob need to be replaced?



Re: DL-4 Repeats Knob
by allnatural on 2011-01-09 20:20:41

does this happen for every delay model?



Re: DL-4 Repeats Knob
by Samitch04 on 2011-01-09 20:25:37

Yes sir.. does not function on any mode.



RE: DL-4 Repeats Knob
by Line6david on 2011-01-13 16:56:17

Hi,

If you have tried a reset on the DL4 and the knob still does not function then the issue is hardware related.

The DL4 needs to be taken to an authorized service center for repair:

http://line6.com/service_centers/

Thanks,

David

Line 6 Customer Support




The information above may not be current, and you should direct questions to the current forum or review the manual.