These forums are read only, please use our new forums here.

Main :: Stompbox Modelers / ToneCore



Echo Park problem
by hesgi on 2011-03-02 13:34:55

Hi,

I have an echo park, but since today it doesn't work. There is no sound and the LED flash like this : GREEN, ORANGE, ORANGE and stop.

In bypass mode : nothing

Then I put the effect on : green, orange, orange and nothing, no sound.

The effect worked fine and it was powered with DC negative since the beginning.

What's the problem, can you help me ? I can open the pedal and do something myself if I know what to do.

Thank you very much



RE: Echo Park problem
by ricksox on 2011-03-08 10:58:23

Hello,

I can't tell you specifically what might be wrong but you should at least rule out the power supply. If you can try another power supply and still get the same behavior then you'll need to have the pedal serviced for repair.

Our local service center for your region is in Belgium. Here's their contact info:

Fuzz It - Line6 service center

Hugo Van Der Goesstraat 17A

9000 Gent

Belgium +32 938 30580 (phone)

support@line6.be

Line6Miller




The information above may not be current, and you should direct questions to the current forum or review the manual.