These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


Still do not understand how to connect the HD 500 directly into my amp Return Valve
by Caxito on 2011-03-09 22:07:02

Guys,

I have the HD 500.

I would like more information on how to jump on my tube preamp and connect directly to the HD 500 on Return of the amp.

1) There is, in fact, only those two ways to skip the pre-amp and use only the return of the amplifier (taught in the "POD Connections, Routing and the 4 Cable Method")? Incidentally, there is no other way?

I ask this because the store I bought my HD, the seller made a more complexade to skip the pre-amp, not so simple as those taught in the "POD Connections, Routing and the 4 Cable Method".

Help me here ...

Thanks



Re: RE: Still do not understand how to connect the HD 500 directly into my amp Return Valve
by Line6david on 2011-03-15 11:35:51

Hi,

  If you want to connect the POD HD 500 so that it bypasses the preamp section of your amp, you can simply connect the HD 500 to the FX Loop of the amp.

Is this what you are trying to do?

Are you unclear on how you want to connect the HD 500?

http://l6c.scdn.line6.net/data/l/0a06434dc7704ca4b3b26b924/application/pdf/POD%20HD500%20Advanced%20Guide%20%28Rev%20E%29%20-%20English.pdf

Thanks,

  David

  Line 6 Customer Support




The information above may not be current, and you should direct questions to the current forum or review the manual.