These forums are read only, please use our new forums here.

Main :: POD X3



Sequentially trim level does not work
by sapalma on 2011-03-10 17:39:43

Noted with surprise that the trim level skips some numbers. It also makes a regression on the scale. Ex: being in 5.0db, I trim up and the meter shows 4.5db
According to Monkey, software and firmware are updated.
Please any help, I need to be in formal English for better understanding. I'm from Argentina.
Thank you very much, Greetings!



Re: RE: Sequentially trim level does not work
by Kneehow on 2011-03-16 16:56:15

Sorry to inform you, but that is the nature of the "Trim" knob on our POD X3's.

The level range doesn't change until the final 1/4 turn until maximum. It is very sensitive and you'll have to keep adjusting until you find the right spot and leave it.



Re: RE: Sequentially trim level does not work
by sapalma on 2011-03-17 04:09:56

I think you misunderstood me.
When I increase the level, the numbers on screen change from 5.0db to 4.5db and should be from 5.0db to 5.5db for example.



Re: Sequentially trim level does not work
by sapalma on 2011-05-10 04:59:24

It's a shame that no one can help me with my problem. I'm still in doubt. Maybe not the right place to solve it. Can anyone give me some advice?
Thanks!




The information above may not be current, and you should direct questions to the current forum or review the manual.