These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


Cannot reconnect my PODHD500 after updating the flash memory to v1.31
by seabreeze666 on 2011-07-10 00:36:34

Hi,

I have just updated to the latest version v1.31 but now my computer refuses to recognise the device. I have tried updating the drivers, restarting my computer, restarting the POD but nothing works. Does anyone have any ideas how to reset or get it connecting again? Thanks, Alan.



Re: Cannot reconnect my PODHD500 after updating the flash memory to v1.31
by Nick_Mattocks on 2011-07-10 01:04:44

Try resetting the HD500's global parameters - hold down the left button on the 4 way Nav Pad as you power on

Try starting the HD500 in Test mode - hold down the right button on the 4 way Nav Pad as you power on - and if this allows Monkey to see your HD500, re-flash the firmware but do not retain your existing presets.

Nick



Re: Cannot reconnect my PODHD500 after updating the flash memory to v1.31
by seabreeze666 on 2011-07-13 10:58:13

Hi Nick, thanks for your reply. Before I got your response I tried using a differnet USB cable and it started working! I had used the supplied Line 6 cable before so this is very strange. Anyway, problem solved for now. Thanks.




The information above may not be current, and you should direct questions to the current forum or review the manual.