These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



clicking sound
by Viktoralnazer on 2011-07-24 18:09:52

Hi everyone, so i have the line 6 UX2 interface connected to monitor speakers through the analog outs, and the usb is connected directly to my laptop which is a toshiba satellite. when i play guitar i hear cracking noise coming out of the speakers but when i stop playing, the noise stops too. also the same thing happens when i play any song. but when i connect an auxiliary cable from the speakers to my ipod and play any song, the noise is gone. could it be that my laptop is the reason? or the UX2 is causing the problem? 



Re: RE: clicking sound
by Kneehow on 2011-07-28 11:33:55

I think the best thing you should do is try a different USB cable on your computer to connect the UX2 to.

 

The next thing beyond this would be a reinstall of your UX2's device driver software: here's a link to the latest Windows USB device driver installer: http://line6.com/software/readeula.html?rid=3987

Butmy first guess would be to try a different USB port connection and see if a different port changes the audio output quality. (Every port is it's own unique connection to the host computer).

 

You might want to consider trying a different USB cable, too just to rule that possibility out.



RE: clicking sound
by Line6Don on 2011-08-01 15:00:48

Hey Viktoralnazer,

This ticket is being closed due to lack of response within 72 hours. If you still have questions or are still experiencing an issue please start a new thread and mark the discussion as a question. To do so you can follow the link below and Ask a Question:

http://line6.com/support/community/support/

For more information about using the Online Technical Support System please review our FAQ at the link below:

http://line6.com/support/docs/DOC-1451




The information above may not be current, and you should direct questions to the current forum or review the manual.