These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


MULTITRACK RECORDING
by sharky006 on 2011-08-15 15:18:12

Hi,

im the happy owner of Line6 POD Studio UX1 and POD HD300. But i have a question. Is there any way (using this two devices) to record guitar, bass and vocal in the same time?

But please, I dont want another reply like "use multitrack recording software". Im asking about hardware possibilities.

Thanks.



Re: MULTITRACK RECORDING
by silverhead on 2011-08-15 15:28:15

Presumably you could use the UX1 Line inputs to receive the HD300 outputs for your guitar processing. Set the HD300 outputs to Studio Mode. Then you could use the two UX1 inputs for your bass (guitar input) and vocals (Mic input).



Re: MULTITRACK RECORDING
by TheRealZap on 2011-08-15 15:30:08

here is a good place to start if you want a hardware solution: http://tascam.com/applications/recording/mtr_digital_portastudio/

butif you need more inputs... the UX1 will simply wont work for you....

if you need a hardware interface with more inputs here is another good place to start:

http://tascam.com/applications/recording/pc_audio_interface/

ifyou are simply trying to do this with what you already have... it isn't going to happen i'm afraid...

you can only use one interface at a time and neither of your devices have enough inputs.



Re: MULTITRACK RECORDING
by sharky006 on 2011-08-16 23:00:59

Thanks



Re: MULTITRACK RECORDING
by TheRealZap on 2011-08-17 05:44:26

but i didn't think you could run the line inputs and the instrument inputs at the same time...




The information above may not be current, and you should direct questions to the current forum or review the manual.