These forums are read only, please use our new forums here.

Main :: XD-V Digital Wireless Microphones


wireless mic forums


P180, what's in the box?
by boswell2007 on 2011-08-24 06:19:53

Hi Don,

specfically, what are the mounting arrangements and the thread size?

We will be mounting them over the stage from below the grid.

I've ordered a pair of P180 (7 days delivery) but want to get the mounts ordered as well to speed up installation.

thanks



Re: P180, what's in the box?
by boswell2007 on 2011-08-25 00:20:37

Hi Don,

Thanks for the clarification,

I'm using 8off V70L in 2 groups of 4

At the FOH position I've got 2 Cantenna which are working fine.

Now want to rejig so that 1 FOH cantenna & 1 overstage paddle feeds each block of 4 V70L.

Therefore I'll mount the P180 in the wings, below the grid, one each side, aimed down at the centre of the stage.

It's a 45m (146') run of LMR195 so I'll be using the max gain setting.



Re: P180, what's in the box?
by dboomer on 2011-08-25 09:13:23

I would advise moving to a lower loss cable at that length.  30m would be the max for LMR-195



Re: P180, what's in the box?
by SouthportSDC on 2011-08-26 10:19:20

Yep I agree, but the lower loss cable are larger and harder to fit BNC

I'll try this and if it gives trouble then I'll go to a lower loss cable




The information above may not be current, and you should direct questions to the current forum or review the manual.