These forums are read only, please use our new forums here.

Main :: Stompbox Modelers / ToneCore



Line 6 DL4 R32 Switch Four ( Tap Tempo ) HELP
by jeffcox800 on 2011-09-08 06:39:06

I was repairing a solder joint on the actuator contact pad and my solder tip knocked the R32 resistor off.

What do I need to replace it with?  Should be something like this:

"4.02K, 1/8 Watt, 1% 1206 surface mount package configuration resistor"



Re: RE: Line 6 DL4 R32 Switch Four ( Tap Tempo ) HELP
by Kneehow on 2011-09-09 09:03:41

While we can offer you info about the DL4's general product specs here on the support forums, the sort of repair assistance details that you're asking for are not in the scope of what Product Support can offer; this is by Line 6's Company Policies.

 

This type of information is only available to our Authorized Service Center (ASC) technicians. In addition to schematics, repair support, they are the only entities that can order replacement parts from the company.

 

Please give your local ASC a call.

 

http://line6.com/support/serviceCenters/



Re: RE: Line 6 DL4 R32 Switch Four ( Tap Tempo ) HELP
by jeffcox800 on 2011-09-18 20:50:18

Line6Perry,

This information has been given already for the different resistor on a different switch on these forums.  Please see: 

http://line6.com/support/thread/26489

This is a .05 cent part. I'm not trying to steal trade secrets just fix a simple problem.  My pedal is out of warranty and I do not assume that Line 6 will be responsible for anything...

Thanks.



Re: Line 6 DL4 R32 Switch Four ( Tap Tempo ) HELP
by jaysonsayshello on 2012-09-25 09:06:28

Has this been figured out?  Is it definitely 4.02k resistor?  I didn't have that exact resistor value on hand so I tried using a 4.7k and a 4.4k with some crazy weird results.




The information above may not be current, and you should direct questions to the current forum or review the manual.