These forums are read only, please use our new forums here.

Main :: Line 6 X2 Digital Wireless



Line 6 XDR 95 Rackmount Problem
by beyondwithin on 2011-09-12 16:45:46

I purchased this unit 2-3 years ago and it worked great for months (aside from a bit of crackling when moving the cord) . After a slow gigging schedule and lack of use, I decided to go with a patch cord for a while. When I tried firing back up the unit , everything powers up, receiver and transmitter, but I am not getting any sort of signal whatsoever. I've attemped changing channels and read the manual inside and out. Could this problem be due to the 1/4 - 1/8th cord from the transmitter to the guitar?I had problems with crackling since initial purchase but it was never a huge issue. I don't want to spend even more money on a replacement cord if im not 100% sure that will solve the problem. I spent over $500 on this unit and am definitely not too impressed.

Please Help!

cannibal_chris@hotmail.com



Re: Line 6 XDR 95 Rackmount Problem
by dboomer on 2011-09-12 17:01:48

I can't be sure 100% over the internet either.  I would say that there is a large possibility that the cable could be bad.  Have you measured the cable to see if it is working?



Re: Line 6 XDR 95 Rackmount Problem
by beyondwithin on 2011-09-12 18:20:22

I work in a guitar shop and had our technician test the cable using a voltmeter and he didn't notice any problems. I'm a n00b when it comes to those things, but I could have him test it again just to double check. I'm hoping its just the cable as it was working flawless before I stopped using it.




The information above may not be current, and you should direct questions to the current forum or review the manual.