These forums are read only, please use our new forums here.

Main :: DT50/DT25



DT-25 Head dimensions? (they are not anywhere, only combo dimensions available)
by mmunguia on 2011-11-09 12:11:38

Hello,

  Quick question, what are the dimensions of the DT-25 head?  (The size chart provided by Line 6 miller, is blank for the head itself).   I am wondering to see how its going to fit on a 1x12 cabinet I own

Thx!



Re: DT-25 Head dimensions? (they are not anywhere, only combo dimensions available)
by Rowbi on 2011-11-10 01:13:13

I don't know for sure, but from all the photos I've seen the 1x12 ext cab is the same size as the 1x12 combo... and that doc shows the combo size.

then from the photos the head looks to be about the same width and depth as the ext cab, and around half the height of the cab.

Hope this helps

Rowbi



Re: DT-25 Head dimensions? (they are not anywhere, only combo dimensions available)
by Nick_Mattocks on 2011-11-10 13:31:31

I have the DT-25 head and the matching 1x12 cab.  The head is the same width as the cab, just under half the height of the cab and about 3" less deep than the cab.  I will try and find my measuring tape tomorrow if I get time and measure it for you.

Nick



Re: DT-25 Head dimensions? (they are not anywhere, only combo dimensions available)
by Rowbi on 2011-11-15 01:02:07

I asked LIne 6 to ammend the DT25 dimensions document with the Head info.

it's here now: http://line6.com/support/docs/DOC-2114

Cheers

Rowbi



Re: DT-25 Head dimensions? (they are not anywhere, only combo dimensions available)
by finnster on 2011-11-24 05:08:44

So the head is 25" wide and the 1x12 Combo is 21" wide.

That seems odd that the head is wider than the combo and extension cab. 



Re: DT-25 Head dimensions? (they are not anywhere, only combo dimensions available)
by spikey on 2012-10-07 08:03:08

Zzounds say 14 Tall x 25 Wide x14 Deep for the head...




The information above may not be current, and you should direct questions to the current forum or review the manual.