These forums are read only, please use our new forums here.
XDS95 issue or just annoyance?
on 2011-11-30 06:20:14
Here's my situation.
I set my channel on the receiver and on the transmitter and all works fine during sound check.
I turn off the transmitter to save battery life until show time...but the receiver never loses power.
Come show time, I turn on my transmitter and I get no signal.
It appears to be on the same channel that I left it on, so I hit channel and run thru all of the channels until I get back to the channel it was on.
Still no signal.
I then have to go to the receiver and do the same thing.
Then it finally starts to pass signal.
What's going on here and is there a way to force it to always stay on a channel until I manually change it regardless of losing power or not?
The information above may not be current, and you should direct questions to the current forum or review the manual.