These forums are read only, please use our new forums here.

Main :: Lowdown



LowDown LD400 Pro Speaker specs
by natn0 on 2011-12-02 11:51:58

Hi,

I have a LD400 Pro and the speakers and horn has burned out due to a faulty amp module.

What are the impedance/wattage specs of the horn and the 10 inch Eminence speakers?

(The Eminence speakers say 8 ohms and I assume they are rated for at least 200W each)

And when did you switch between Hi-Touch and Eminence?

Thanks for your assistance!



Re: LowDown LD400 Pro Speaker specs
by Kneehow on 2011-12-07 11:01:45

Speakers should be 10" either Eminence or Hi-Touch 8-Ohms

The Tweeter w/Horn is an 8-Ohm (not sure on the brand)

I'm not sure about the switch... in terms of why or when.



Re: LowDown LD400 Pro Speaker specs
by natn0 on 2011-12-17 07:33:25

What about the wattage? For both the horn and Eminence?



Re: LowDown LD400 Pro Speaker specs
by Line6Don on 2011-12-22 10:38:34

Unfortunately, I am unable to find the specific wattage for the horn and Eminence speakers. However, If you need to purchase a replacement, you may purchase the correct replacments for your amp through any of our Line 6 Service Centers. To locate a Line 6 Service Center near you, use the locator at the link below:

http://line6.com/service_centers/">http://line6.com/service_centers/">http://line6.com/service_centers/



Re: LowDown LD400 Pro Speaker specs
by Line6Tony on 2011-12-27 14:05:58

I got the specs from Engineering. 150 watts for the LD400 speakers and the horn.



Re: LowDown LD400 Pro Speaker specs
by DeadZeriousBass on 2013-03-08 09:31:52

That probably explains why one of my speakers are starting to blow.  I am purchasing new Professional speakers for my LD400  from eminence  the Kappa Pro 10A   they cost about 100.00 a Piece  and they can handle up to 500W each  and they are recommended for Bass Cabinets as well




The information above may not be current, and you should direct questions to the current forum or review the manual.