These forums are read only, please use our new forums here.

Main :: FBV MkI / MkII Controllers



Loud pop switching channels
by fosrias on 2012-01-05 17:57:27

I have a new FBV Shortboard MKII with a new spider valve MKII 112 amp. When I switch channels on the foot controller, A to B etc, I hear a loud pop regularly. It does not happen everytime, but most times. This is with the volume @ 100%. I don't hear it if the volume pedal is @ 0%, but I can't imagine the design is such that changing channels requires using the volume pedal to cycle the volume off and on in between each channel change with the volume pedal.

Wondering if I need to take this up the chain for repair/replacement. Thanks.

Mark



Re: Loud pop switching channels
by fosrias on 2012-01-05 18:50:47

Many posts on this:

http://line6.com/support/message/213911#213911">http://line6.com/support/message/213911#213911">http://line6.com/support/message/213911#213911  Best answer: Have to have channel volume high enough. The pops seem to go away for me at about 40% or so. Affects min. volume (which wife is not keen about ).

http://line6.com/support/message/213911#213911">http://line6.com/support/message/213911#213911">http://line6.com/support/message/213911#213911 Another good answer.

http://line6.com/support/message/250052#250052">http://line6.com/support/message/250052#250052">http://line6.com/support/message/250052#250052




The information above may not be current, and you should direct questions to the current forum or review the manual.